|
|
 |
|
|
|
|
|
|
|
|
FALCON 15 Processor
|
|
|
|
 |
|
|
|
Falcon 15 FM is a versatile FM broadcast digital processor based on 3-Bands digital audio architecture, with built-in Stereo MPX coder,and RDS optional card.Falcon 15 FM is an "all in one" machine: its flexibility and user friendly interface make it suitable both for studio and transmission applications; it's affordable price makes it ideal for radio broadcasting, advertisement splitting, web or pod casting, etc...Falcon 15 FM is the easiest choice for broadcasters who claim performance and reliability in one to-do-all box. |
|
|
GENERAL FEATURES Weight: Around 4.5 Kg Dimensions: 1 rack unit, 352 x 483 x 44 mm AC Rate: 220 Vac / 110 Vac Preset curves: 30, factory programmed ANALOG STEREO AUDIO INPUT Conversion. 24 bit Connector Type: XLR female el. balanced Max Input Level: + 20 dBu Level Range: -12 dBu to 12 dBu (1 dB step) Impedance: 600Ohm / 10KOhm EMI -suppressed AGC Range +/- 20dB (Sensitivity Relative) DIGITAL AUDIO INPUT (optional) Connector Type: XLR el. bal. + optical Tos link Formats: AES/EBU, SPDIF Sampling Rates: 32 KHz / 44.1 KHz / 48 KHz / 96 KHz Configuration: automatic selection and jitter correction Input Sensitivity: 200 mVpp AGC Range: 0 to -20dBFs AGC OPERATION AGC Speed: 0 to 6 dB/sec (adjustable - 0.2 dB step) AGC Hold time: Selectable, from 0 to 3 sec AGC Max Gain: Selectable 8, 10, 12, 15 or 20 dB PROCESSING N° of Bands: 3 (Bass, Mid, High) N° of presets: 30 BASS Compress.: THR: related to the chosen Preset ATCK Time: 80ms, REL Time: 250ms Compr. Ratio: 1:INF MID Compressor: THR: related to the chosen Preset ATCK Time: 30ms, REL Time: 90ms Compr. Ratio: 1:INF HIGH Compress.:THR: related to the chosen Preset ATCK Time: 10ms, REL Time: 50ms Compr. Ratio: 1:INF Broadband Limiter: ATCK Time: 5ms, REL Time: 50ms Applied to high frequencies band Dynamic expander (noise gate): Gate threshold adjustable between - 51dB and - 80dB Expansion ratio 2 : 1 (fixed) STEREO AUDIO OUTPUT (ST version only) Connector Type: XLR male el. balanced Conversion: 24 bit Impedance: 600Ohm / 10KOhm EMI -suppressed Level: - 10 dBm to +14 dBm (0.5 dBm Step) REMOTE CONTROL Serial Ports: 2 RS232 SubD 9P optically decoupled Baud Rate: 19200 Baud LOW PASS 15 KHz INPUT FILTER IIR 8Th-Order-Elliptic , 15KHz / -0.1dB, 17KHz / -60dB BY-PASS MODE AGC Off, Gain Ofst 0dB,Out Lvl 0dB Frequency Resp.: 30 Hz-15 KHz (+/- 0.1 dB) Output Noise: -90 dB (A-weighted) THD: 0.01% PassBand Ripple: +/- 0.1 dB SIGNAL PROCESS FILTERSLP 400Hz: IIR 2th Order-Butterworth BP 400Hz-5Khz: IIR 4th Order-Butterworth BP 5Khz-15Khz: IIR 4th Order-Butterworth High Fr. Denoiser: Threshold Adjustable –51 to -80 dB MPX OUTPUT (FM version only) Conversion: 24 bit Pilot Frequency: 19 KHz ± 1 Hz Pilot Injection: –15.5 to –25.0 dB (0.1 dB step) (from 5.6 % to 16.8 %) Pilot Phase: Adjustable +/- 12 degrees (1 dB step) S/N: >85 dB Stereo Separ.: 55 dB Typical on the whole band Crosstalk M / S: 60 dB Crosstalk S / M: 60 dB 38 KHz Suppr: Less than measurable level MPX out level: -9.0 dBm to + 15.0 dBm (0.1 dBm Step) Output Imped.: 600 Ohm Output Connector: BNC floating over chassis, EMI supp. Pilot ref. output: TTL Level Wave Preemphasis: 50 / 75 usec AUX INPUTS (1 and 2) (MPX version only) Connector Type: floating BNC, EMI suppressed Impedance: 10KOhm Input Level: - 40 to 0 dBm Purpose: SCA, RDS inputs RDS / RBDS CODER (FM version only) Supported Standards: RDS (Radio Data System), conforming to the standard CENELEC EN50067 RBDS (Radio Broadcast Data System) conf. to the standard NRSC Standard coding methods: PI, TP, TA, M/S, RT, PSN, PTY, DI, AF (8 lists) Custom coding methods: PS Sequence (up to 8 messages), PS Scrolling (up to 32 characters) RDS subcarrier freq.: 57 kHz +/- 3 Hz RDS output level Adjustable from – 44.0 dB to – 20.0 dB (0.1dB/Step) Synchronization To internal 19Khz pilot tone |
|
|
